DESIGN FILM

Introduction

 ​Design Film 

Dae Ha Design Film is similar to our Metallic or Holographic flex but it has a variety of cut designs to create various and complicated designs. Sublimation printing on top of Design film is available and it enables to make more rich and diverse designs. Please check the sizes and patterns of Design film and if other patterns are needed, please contact us.  

Features ​of Design Film

- High glossy, reflection and mirrored effects ​
- Sublimation printing can be done on the surface of the flex​
- Very easy to weed​

- 34 designs available​

 

Product information

- 30 micron Skin 
- 50 micron hot melt 
- Tolerance ±20 microns
- Sticky liner

 

Packing  

- Standard roll size: Width 240 mm​ x Length 100 M / roll ​ 

- Minimum Order Quantity : Normal color 4 rolls /color, Spangle or Pattern 10 rolls/color
- Packing: 2 rolls per 1 box ​
- Box size: 210 mm x 210 mm x 500 mm​
- Gross weight: approx. 11.00 kg / box ​
* 330 mm wide rolls are available in Round 4 mm, 5 mm, 6 mm, 7 mm and Square 6 x 6 mm  ​
* Other dimensions or special packing are available on request.  
 

Storage Conditions 

- Temperature: less than 25℃(± 5℃)

- ​Relative Humidity: 50% (±15℃)

- ​Keep out of direct sunlight


Transfer Conditions of Design Film  

  

Transfer Conditions of Sublimation Printing  

 

 


 
 

* Suitable for Cotton, Polyester, Spandex, mixtures of Polyester/Cotton, Acrylic & similar textiles. 

  Not suitable for Nylon or coated fabrics.​ 

  

Washing Conditions 

​- Temperature: Cold

- Mode: Wool washing 

- Wash inside out 

- Can be tumble dried on a low setting 

- Can be household ironed inside out

- Do not bleach 

 

Note: All information is given as guideline​ and the technical information and recommendations above are based on our test. We highly 

         recommend that you perform a test cut and print prior to production. 

 

 

How to Use Design Film


Patterns of Design Film